Fix & Flip

Can You Be Your Own Contractor on a Fix and Flip Loan?

By the Ambition Lending credit team · Reviewed by Sydney KibuukaLast reviewed 7 min read
In short

Sometimes, but flippers rarely qualify for owner-builder exemptions because the house is built for sale. State law, lead rules and lenders decide.

You can be your own contractor on a fix and flip loan only if your state's licensing law allows it and your lender accepts your execution plan, and for a flip both are harder than most investors expect. Owner-builder exemptions in states like Arizona, Florida and California are written for owners who will occupy the property, so an investor who renovates to sell usually has to use licensed contractors for regulated work, even if they manage the job themselves.

Run your numbers: Free hard money loan calculator — Estimate your maximum loan, monthly interest, points and cash to close.

Below: the law in three large flipping states, how lenders view self-managed rehabs, the lead-paint rule, and a hypothetical cost comparison. For loan terms, see our fix and flip loan program.

Key takeaways

  • Managing licensed trades is often allowed; doing regulated work yourself on a house you will sell often is not.
  • Arizona, Florida and California each treat a sale within one year of completion as evidence the work was done for sale, which undercuts the owner-builder exemption.
  • EPA says flippers who renovate pre-1978 homes themselves are doing renovations for compensation and must be lead-safe certified.
  • Your own labor is not a cost: the IRS does not let you add it to basis, and a lender cannot reimburse it as an invoice.

What does "being your own contractor" mean on a flip?

It usually means acting as the general contractor: you hire and schedule the trades, buy materials and manage permits and inspections. Some investors also do part of the work themselves, such as demolition, painting or flooring.

The distinction matters: licensing laws regulate who may perform or contract for construction work, and managing licensed subcontractors is a different legal position from doing electrical, plumbing or structural work yourself on a house you will sell.

Do owner-builder exemptions apply to house flippers?

Mostly no. Owner-builder exemptions exist so homeowners can work on their own homes, and states write them to exclude projects built or improved for sale. Three examples:

StateWhat the law saysWhat it means for a flip
ArizonaA.R.S. 32-1121(A)(5) exempts owners who do the work themselves only if the property is not intended for sale or rent; a sale or offer for sale within one year after completion is prima facie evidence the project was for sale. Paragraph (6) exempts owners acting as developers who improve property for sale only if they contract with licensed general or specialty contractors, whose names and license numbers must appear in all sales documents.Manage licensed trades and disclose them at sale; do not plan to self-perform regulated work.
FloridaFla. Stat. 489.103(7) exempts owners acting as their own contractor on one- and two-family homes for their own occupancy and "not offered for sale or lease"; selling or offering the home within one year after completion creates a presumption the work was for sale.The exemption is built for owner-occupants; a flip offered for sale within a year runs straight into the presumption.
CaliforniaThe Contractors State License Board's owner-builder overview says owners doing the work themselves are exempt only if the structure is not intended for sale; owners who hire licensed subcontractors are limited to four or fewer structures for sale per calendar year; hiring a licensed general building contractor has no limit.Hiring licensed trades is the usual route; self-performing the work on a house built to sell is not exempt.

Other states and many cities have their own rules on who may pull trade permits. Check them before you close, not after the first inspection fails.

Do hard money lenders let borrowers act as their own contractor?

Some do, case by case. A rehab lender is lending against a finished value that depends on the work being done on time and to code, so "who is doing the work?" is part of underwriting. At Ambition Lending, the execution plan, including who is doing the work, the permits needed and the sequence and timeline, is one of the things we review on every flip.

A self-managed plan is easier to approve when it includes:

  • Relevant experience or a partner who has run similar jobs.
  • Named, licensed trades for regulated work, with written bids.
  • A line-item budget priced from those bids plus a separate contingency. See how to build a rehab budget lenders approve.
  • A permit plan naming who pulls each permit.
  • Draw milestones an inspector can verify, matched to the budget. See hard money draw schedules explained.

Expect more scrutiny as the scope grows: cosmetic work run by an experienced investor is a different risk from a first-time flipper's full gut.

Do you need lead-safe certification to renovate your own flip?

Yes, if the house was built before 1978 and the work disturbs painted surfaces beyond the minor-repair thresholds. EPA's Renovation, Repair and Painting (RRP) rule covers remodeling, electrical, plumbing, carpentry, painting prep and window replacement in pre-1978 housing. It does not cover minor work that disturbs six square feet or less of paint per room inside or 20 square feet or less outside, but window replacement and demolition of painted surfaces are always covered.

EPA has answered the flipper question directly: individuals who buy, renovate and sell pre-1978 homes for profit and do the work themselves are performing renovations for compensation, so they must be trained and certified renovators and certified as a Lead-Safe Certified Firm (EPA frequent question, archived January 2021; check EPA's current RRP program page for updates). If you hire trades instead, make sure each firm disturbing paint is certified.

Can you count your own labor in the rehab budget?

Not as a cost. IRS Publication 551 says you cannot include the value of your own labor, or any other labor you did not pay for, in the basis of property you construct. Your work lowers the cash you spend, but it does not raise your basis or create a deduction against the sale price. How the profit itself is taxed is covered in how house flip profits are taxed.

Draws reimburse verified work, usually backed by invoices and inspection. If you will do part of the work yourself, agree with your lender before closing how those line items are documented and released.

Does acting as your own contractor actually save money?

It saves the general contractor's fee, but only if you hold the schedule. Every extra month adds interest, taxes, insurance and utilities. This hypothetical example shows how fast the savings disappear.

Hypothetical deal: $250,000 purchase, $60,000 rehab, $420,000 after-repair value. Under Ambition Lending's fix and flip terms (up to 90% of purchase plus 100% of rehab, capped at 75% of ARV), the loan is $225,000 + $60,000 = $285,000, below the $315,000 ARV cap. Assume a hypothetical 10% interest rate, interest on the full $285,000 (about $2,375 a month), $800 a month of other holding costs, and a hypothetical general contractor fee of $9,000 that self-managing would save.

Extra months from self-managing (hypothetical)Added interestAdded other holding costsNet savings vs. $9,000 GC fee
0$0$0$9,000
1$2,375$800$5,825
2$4,750$1,600$2,650
3$7,125$2,400−$525

If interest accrues only on drawn funds, early months cost less, but the direction is the same. Run your own numbers in the fix and flip calculator, and read holding costs explained for the full list of monthly costs. Delays also push you toward maturity; see how to plan an extension before maturity.

How do you self-manage a flip without hurting the loan?

  1. Check the law first. Confirm your state's owner-builder rule and the local permit rules for each trade.
  2. Use licensed trades for regulated work and keep their licenses and insurance certificates on file.
  3. Get RRP certified before touching paint in a pre-1978 house, or hire certified firms.
  4. Collect lien waivers with each payment so title is clean at sale.
  5. Keep a contingency for change orders and cost overruns, and tell the lender up front who is doing what.

Ambition Lending makes business-purpose fix and flip loans from $100,000 with no fixed maximum, in metropolitan, suburban and rural markets, typically priced at 8–12% interest and 2–4 points. Send the deal, your budget and your execution plan, and on most requests you will have a term sheet within 24 hours.

Frequently asked questions

Can I be my own general contractor on a fix and flip loan?

Often you can manage the project and hire licensed trades, but most owner-builder exemptions cover owners who will live in the home, not sell it. Arizona, Florida and California treat a sale within one year of completion as evidence the work was done for sale.

Do hard money lenders allow borrowers to act as their own contractor?

Some do, case by case. Lenders weigh your experience, the scope, permits and whether licensed trades handle regulated work. A plan with a line-item budget, named subcontractors and a realistic schedule is easier to approve.

Do I need EPA lead certification to renovate a flip myself?

Yes, for pre-1978 homes when the work disturbs paint above the minor-repair thresholds. EPA has said flippers who do the work themselves are renovating for compensation and must be certified.

Can I count my own labor as part of the rehab budget?

Not as a cost. IRS Publication 551 says the value of your own labor cannot be included in a property's basis, and a lender cannot reimburse it as an invoice.

Does being my own contractor save money on a flip?

It can save a general contractor's fee, but delays erase it. In our hypothetical example, a $9,000 saved fee is gone after about three extra months on a $285,000 loan.

About this guide

Written by the Ambition Lending credit team, the people who underwrite and fund our loans, with editorial oversight by Sydney Kibuuka, Founder & CEO. Last reviewed . Facts are linked to primary sources; we correct errors promptly — see our editorial policy. General education for business-purpose investors, not legal, tax or investment advice.

Related guides

Fix & Flip

Holding Costs Explained: The Silent Profit Killer in Fix and Flip Deals

Flip holding costs are the monthly interest, taxes, insurance and utilities you pay until the sale closes. See the formula and a hypothetical delay example.

Fix & Flip

Change Orders on a Fix and Flip: How to Control Rehab Overruns

Control fix and flip change orders with written pricing, funded contingency and lender sign-off before work starts. Includes a hypothetical overrun example.

Investor Strategy

How Are House Flip Profits Taxed? Dealer vs. Investor Status

Flip profits on homes held a year or less are taxed as ordinary income, and dealers may also owe self-employment tax. Here is how the IRS rules work.

Fix & Flip

How to Build a Rehab Budget and Scope of Work Lenders Approve

A rehab budget lenders approve is line-item, priced from bids, tied to a room-by-room scope and draw schedule, with 10–15% contingency and a permit timeline.

Fix & Flip

Hard Money Draw Schedule Explained for Real Estate Investors

Learn how hard money draw schedules work, what lenders release, and how investors should plan rehab liquidity with Ambition Lending.

Fix & Flip

What Should a First-Time Fix and Flip Investor Know Before Buying?

Eight things a first-time flipper should settle before buying: ARV, contingency, timeline, lender, exit, carrying costs, contractors and taxes.

Send the deal. Get real terms tomorrow.

Get my term sheet (310) 750-8538
Investors finalizing a real estate loan